Dynojet Quick Shifters

  
 
The Dynojet Quick Shifter Sensors are compatible with USB Power Commanders and allow "full throttle, clutch- less" up shifts. In conjunction with the Power Commander, the high quality sensors enable fast, accurate and reliable gear changes. Sensors are attached to the gear linkage and connect into the Power Commander expansion port.
  
Once installed, the rider can shift up simply by pressing or lifting (depending on the bike) the gear shift lever. The amount of "kill time" is adjustable by the user via the software provided. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding.
  
  There are three basic choices of switches that can be used to activate the DQS  
  SHIFT ROD PRESSURE/TENSION SENSOR    
 

The universal sensor mounts in the shift rod and is available in both "push" and "pull" styles, depending on the direction the shift rod moves during an up shift. For certain makes and models a Shift Rod Kit is offered. This is a direct replacement shift rod that will allow quick installation with no custom work required.

 
 
LINEAR TRAVEL SENSOR KIT
For applications where a bike does not have a shift rod, or the pressure/tension sensor will not fit, we offer a Linear Travel Sensor. One end of this sensor is mounted to the shift lever itself and the other to a fix point on the chassis. This sensor is available in both "push" and "pull" style to suit all installations. A universal mounting kit is included.
 
 

HANDLEBAR MOUNTED SWITCH

A handlebar mounted activation switch is also available.

  
The DQS is compatible with all Power Commander III USB's and plugs directly into the expansion port.
NO CUTTING OR SPLICING OF THE BIKE'S WIRING IS REQUIRED.
         


REPS Motorcycles - Unit 4 Ifton Industrial Park - Caldicot Road - Rogiet - Caldicot - NP26 3TF - 01291 422226